OPEN MIND

5th Axis Inc. | San Diego, CA, USA

In 2004 in San Diego, California two experienced and motivated entrepreneurs, Steve Grangetto and Chris Taylor co-founded 5th Axis, Inc. as the company’s name implies, they recognized that 5‑axis machining would give their new company a competitive advantage.

Chris Taylor boils down their company’s philosophy into one sentence: “From day one, 5th Axis’ strategy has been to take advantage of the most advanced software, equipment and technologies available.”

Today, their bustling shop floor is equipped with the “best of the best” 3- and 5‑axis high-speed machining centers from Germany, Switzer­land and Japan. To further support the company’s philosophy to use the most advanced software, all of the machines are programmed with hyperMILL® CAM software from OPEN MIND. But it wasn’t always this way.

Customer Testimonial: 5th Axis about hyperMILL®

Want to watch our videos?

Then please enable cookies to view this content.

Enable cookies

 

hyperMILL® MAXX Machining roughing module extends tool life by maintaining a constant chip load. The bottom-line is, using hyperMILL® MAXX Machining results in super-efficient and fast tool paths.”

Chris Taylor, co-owner 5th Axis, Inc.

To evaluate new CAM software for high-end machining centers

Once Grangetto and Taylor began to dig into programming the ma­chi­nes, they discovered their existing CAM software had huge short­co­mings. They were faced with unexpected machining collisions and couldn’t fully utilize the speed, capabilities and potential of their new high-end machines.

Grangetto and Taylor assembled some of their best talent to evaluate new CAM software for their high-end machining centers. Their team consulted with 5‑axis machine manufacturers to determine what CAM software they were using to program 5‑axis demonstrations. Without exception every single 5‑axis demo, hands down, was pro­gram­med in hyperMILL®. Encouraged by this feedback, they decided to experience hyperMILL® first hand. Taylor recounts that, “We demo’ed hyperMILL® on a complicated 5‑axis part that was giving us fits, and were very impressed by the efficient tool paths and the reliable collision avoidance. The demo clinched the deal and we’ve been successful using hyperMILL® ever since.”
Grangetto added: “Our company goal was to find a CAM software solution that allowed us to take advantage of the benefits of high-speed machining. The results have been faster run times, better surface finishes and overall better part quality. Over the years we found that hyperMILL® has fit our company’s strategy perfectly.”

3-, 5-axis machining centers | 5th axis | production machining – Advanced 3- and 5-axis machining centers from Germany, Switzerland and Japan are all programmed with <em>hyper</em>MILL<sup>&reg;</sup> from OPEN&nbsp;MIND.

Advanced 3- and 5-axis machining centers from Germany, Switzerland and Japan are all programmed with hyperMILL® from OPEN MIND.

More Speed and Efficiency

hyperMILL® CAM software from OPEN MIND also includes an exceptionally productive module called MAXX Machining. By careful control of material removal and use of smooth trochoidal tool path motion where possible, hyperMILL® MAXX Machining creates extremely efficient roughing tool paths. It allows feed rates to be set for the best cutting conditions, rather than the typical process of setting feed rates for the most challenging cut, such as a corner condition.

 –

OPEN MIND Support – The Big Differentiator

Taylor said that, “hyperMILL® support is one of the things that really separates OPEN MIND from other CAM software vendors on the mar­ket. OPEN MIND takes complete ownership of postprocessor de­ve­lop­ment, and that’s a really big deal, especially when 5‑axis machining where an accurate post becomes extremely critical in avoiding cra­shes. The machine does exactly what we simulate on the computer screen.”

OPEN MIND postprocessors are developed as a core technology of the company, using internal experts. Postprocessors are customized and have configurable parameters to give the customer needed con­trol for their particular environment. “We have the confidence to take on ever-more challenging jobs due to the combination of high quality tool paths and the advanced capabilities of the CAM software, the postprocessor support, plus having a team of extremely skilled tech­ni­cal support people on hand when we program very complex parts. With OPEN MIND’s help we never burn money getting stuck on a job. Their contribution has been a really big part of the growth of our bu­si­ness,” commented Taylor.

www.5thaxis.com

simulation with hypermill | 5th axis | production machining – With <em>hyper</em>MILL<sup>&reg;</sup> you’re able to simulate not only the part in its fixture, but the tool, the tool holder, the spindle and the entire machine envelope.

With hyperMILL® you’re able to simulate not only the part in its fixture, but the tool, the tool holder, the spindle and the entire machine envelope.


Customer Story

 –
5th Axis Inc.

San Diego, CA, USA

/fileadmin/user_upload/pdf/references/production-machining/cus-mechanical-5th-axis-open-mind-en.pdf
mobile-s mobile-m mobile-l tablet desktop-s desktop-m desktop-l desktop-xl